Search our site using the bar below.

New Permabond ET5422 structural epoxy with astronomical performance is launched! This new ultra high strength two-part epoxy adhesive was originally developed for a spacecraft project and later adopted by an aircraft parts manufacturer. ET5422 offers high peel strength and achieves exceptionally high structural bond strength and performance. The material is fully toughened with second generation core shell rubber technology, to offer excellent impact, vibration, peel and shear strength. Permabond ET5422 is a highly versatile adhesive, providing high strength adhesion to a wide range of engineering materials and is ideal for replacing welding. It allows greater freedom of material selection with its ability to bond dissimilar materials and creates an impervious seal against moisture and chemicals. It can also be used instead of mechanical fasteners, helping to keep assemblies lightweight and rattle free. By not having to drill and fix parts, the processing is much easier - and with no damage to the integral strength of the substrate. This easy-to-use room temperature curing epoxy adhesive consists of resin and hardener and is supplied in convenient dual cartridges for dispensing via a handgun. Adhesive is mixed and dispensed via static mixing nozzles. It can also be supplied in bulk for use with automatic dispensing equipment. Full cure can be achieved at room temperature, although cure times can be reduced with the application of heat. Permabond believes the use of this adhesive should not be limited to aircraft and space rocket manufacturers and that other industrial users should have access to it to maximise the performance of their bonded assemblies. Manufacturers of sports equipment, automotive parts, marine and prosthetics to name just a few - its uses are quite diverse. Typical shear strengths of substrates bonded with Permabond ET5422: Material Shear Strength Aluminium 30 N/mm² Mild Steel 22-26 N/mm² Stainless Steel 16-20 N/mm² Hot Dip Zinc Galvanised Steel 18-22 N/mm² Carbon Fibre 20-30 N/mm² Epoxy FRP 18-25 N/mm² Polyester GRP >10 N/mm² (substrate failure) This product has been designed by UK-based chemists and is manufactured in Permabond’s factory in Hampshire, UK. Available packaging options: 10 x 50ml cartridges 6 x 400ml cartridges Bulk on request

Introducing Permabond MT3836 - Flexible, thermally conductive, fire retardant adhesive. This two-component modified MS polymer adhesive and sealant cures fully at room temperature and complies with the fire retardancy requirements of UL94-V0. It contains a thermally conductive filler, which conducts heat away from bonded components, making it ideal for use in electronics applications such as bonding heat sinks, and in electric vehicle battery applications such as bonding battery modules, where MT3836 helps to improve vehicle thermal management. The flexible nature of MT3836 also means it is compressible, which reduces stress on sensitive components, especially if dissimilar materials are being bonded and differential thermal expansion and contraction forces put stress on the joint. The cured, flexible material absorbs impact and vibration forces and is also electrically non-conductive. Permabond MT3836 is suitable for bonding a wide variety of different substrate materials including metals, composites, polycarbonate, ABS, nylon and other plastics. Benefits of Permabond MT3836 include: Thermally conductive >1 W/(m.K) Fire retardant to UL94-V0 Electrically insulating Elongation >100%, Shore A hardness 60 Two component – available in dual cartridges for easy dispensing via mixing nozzle Full cure at room temperature (handling time 2-3 hours) High viscosity – gap filling to 5mm Available packaging options: 6 x 400ml cartridges Bulk on request Download Thermally Conductive Adhesives brochure

Anaerobic sealants are generally very hard, rigid adhesives, which perform well in compression, torsion and shear but are notoriously brittle in applications where there could be peel or cleavage stresses. In applications where dissimilar metals are being bonded, regular anaerobic sealants may struggle to flex to accommodate differential expansion and contraction, especially when there are broad temperature fluctuations or sudden thermal shock. But there is no need to dismiss anaerobic adhesives and sealants in these demanding applications! Permabond F201 is rubber toughened, which enables the cured adhesive to flex in applications where there are high peel stresses, thermal shock and differential expansion and contraction. Permabond F201 is popular with boiler manufacturers, copper cylinder manufacturers and installers and is ideal for joining copper/brass pipework connections to other metals. It can be used instead of welding, brazing or soldering and is much easier to achieve leak free joints. It eliminates the risk of pin prick weld holes and removes the need for high risk processes involving naked flames. Other benefits of this product include: · High peel strength - 100 N/25mm on aluminium - ten times higher than a regular anaerobic adhesive! · Single component - no mixing required · Full cure at room temperature on close fitting metal parts · Handling time on mild steel <15 minutes · WRAS approval - safe for use with drinking water systems If the viscosity of F201 does not meet your requirements, Permabond F200 offers lower viscosity and F202 offers higher viscosity. Products are available in -10 x 50ml bottles -5 x 200ml bottles -1 x 2 litre bulk Click to download flyer: Click to ask technical query tech.support@permabondeurope.co.uk

PERMABOND® ET5162 has been formulated to comply with both FDA 175.105 and EU 10/2011 food contact regulations. It is a two-component, room temperature curing epoxy adhesive, which offers excellent performance on stainless steel and has better temperature resistance than standard two-part epoxies. It can bond a wide variety of materials including stainless steel, aluminium, composites, certain plastics and ceramic surfaces. ET5162 has a pot-life of approximately one hour and while the adhesive does cure at room temperature, cure speed can be accelerated by applying heat. As this product is compliant with food contact regulations, it is ideally suited to bonding applications in catering equipment such as: · Food and beverage manufacturing equipment and machinery · Kitchen fittings · Coffee machines, drink, ice cream and smoothie dispensers · Sieves, strainers and filters · Utensils and white goods The material is supplied in cartridges for use with static mixing nozzles, making application very easy. Bulk is available for use with automated dispensing systems. Available is 10 x 50ml cartridges, 6 x 400ml cartridges, 5kg and 20kg bulk packaging. Shelf life: 12 months 5-25°C. Click to download TDS Click to ask technical query tech.support@permabondeurope.co.uk

Permabond introduces new high temperature resistant cyanoacrylate adhesive! PERMABOND® 825 is a low viscosity cyanoacrylate adhesive that provides higher strength at high temperature. This fast-setting cyanoacrylate bonds metals, rubbers, plastics, and more. Permabond 825 resists up to 200°C and has excellent retention of strength during thermal ageing. PATENTED TECHNOLOGY Features and Benefits Strong bonds that resist up to 200°C No secondary or post-cure required to achieve temperature resistance Low viscosity 120 mPa.s Tolerates stresses at high temperature Does not require zero-gap – better thermal stability with a larger gap and improved ability to bond issimilar surfaces Higher strength retention after thermal ageing 17 MPa bond strength to mild steel at 25°C 4 MPa bond strength to mild steel at 150°C This product differs from other high temperature ethyl and allyl cyanoacrylates available on the market as it does not require a post-cure at high temperature before it achieves full strength. This helps speed up production processes and reduce costs as clamping, jigs and ovens are not required. Component parts can be bonded in seconds and move on to the next stage of the production process. With rapid strength development parts are soon ready to be put into use, either at normal room temperature or into more harsh conditions, such as solder reflow processes or paint bake ovens or for general use in high temperature environments. This high performance, patent-pending technology has been developed to help satisfy demands in a number of market sectors including electronics, electric motor manufacture, e-mobility battery applications, as well as for bonding applications where post assembly paint baking is carried out. For assistance choosing the best high temperature resistant cyanoacrylate for your application, contact our technical support group. For more information on Permabond 825, download the technical datasheet.

PERMABOND® is expanding its range of adhesives for low surface energy plastics, with the addition of two new no odour products, Permabond TA4630 and TA4631. These adhesives have been developed to meet the needs of manufacturers needing to join components made from difficult to bond plastics such as polypropylene, polyethylene, PTFE and even acetal (POM), without surface pre-treatment, while at the same time addressing demands for reduced odour, both during production and after the adhesive has cured on the assembled parts. These products not only perform well on low surface energy plastics, they are also ideal for bonding dissimilar materials such as polyimide, carbon fibre, rubber, stainless steel and other metals. The odourless feature of these adhesives makes them particularly well suited to applications in automotive interiors, or children's toys, where residual smell may be undesirable. Key features of the products include: No odour during application = improved operator comfort No residual odour on bonded components Suitable for bonding dissimilar materials including metals, composites, rubber, polyolefins (PP/PE/LDPE), PTFE and even acetal/POM! TA4630 is black and contains spacer beads for applications where gap control is important TA4631 is translucent white and does not contain spacer beads, for smaller gaps and tighter fitting parts Suitable for e-coated metals Rapid, room temperature cure No flame or plasma treatment required 1:1 mix ratio and conveniently supplied in dual cartridges TA4631 is also supplied in 25ml dual syringes – no dispensing gun required Available in: 10 x 50ml cartridges 6 x 400ml cartridges Bulk packaging on request TA4631 is also available in 15 x 25ml dual syringes Click to download TA4630 TDS Click to download TA4631 TDS

Optimise your adhesive's bond performance and ensure consistent bonding results by using Permabond surface cleaning materials to remove grease, grime, residues, release agents and contaminants before bonding. Surface preparation products available to suit your requirements include: IPA wipes – isopropanol wipes packed in handy sachets in bags of 50 Single large IPA wipes – large lint cloth in a sachet for larger / grimier components IPA wipes in bulk tub of 80 – ideal for a busy production environment Permabond Cleaner A - aerosol spray isopropanol Permabond 2K Primer - For the ultimate in surface pre-treatment and enhancement of adhesive performance. Highly recommended for use on applications where long-term resistance to environmental conditions is paramount . Other proprietary cleaners such as white spirit can leave a residue which can affect bond strength, Permabond recommends using tested and proven surface cleaners before bonding. Click to request pricing (link to orders.europe@permabond.com) Click to buy online https://www.permabond.co.uk/shop Click to ask technical query (link to tech.support@permabondeurope.co.uk)

By popular demand, Permabond’s new UV639 adhesive is now available in a convenient kit, including a UV curing torch. The handy battery powered LED torch combined with the UV curing adhesive makes on-site assembly of acrylic (PMMA/Perspex®/Plexiglass®) sneeze screens, sneeze guards and shop fittings quick and easy. The adhesive is a single part product, which cures in seconds under the UV torch light. It is crystal clear and non-yellowing once cured, which results in an aesthetically more pleasing join that mechanical methods such as screws, nuts and bolts. Using Permabond UV639 for bonding acrylic to acrylic, or acrylic to metal brackets/supporting feet also eliminates the need for drilling into the acrylic, which reduces the risk of damage and leaves a smooth, tidy join, which is much easier to wipe clean – an important consideration in covid screen and shop fitting applications. An additional health advantage of this adhesive is that it is solvent free, unlike many other popular acrylic adhesives. UV639 can also be used to bond other materials such as polycarbonate, composites, glass, metals and even PETG, providing at least one of the components is clear and the UV light can reach the adhesive to cure it. Click to buy from webshop Click for TDS Click for UV639 product leaflet Click for technical support

PERMABOND® UV639 UV-curing adhesive is a new acrylic bonder, or "acrylic adhesive" i.e. it is ideal for bonding acrylic (Perspex®, PLEXIGLASS®, PMMA), as well as polycarbonate and other difficult to bond plastics like PET-G, with a seamless and aesthetically pleasing finish. UV639 performs particularly well on plastics, but it can also be used to bond glass, metals, and other materials, making it perfect for bonding hinges and other metal fixings to acrylic or glass "sneeze screens" or "screen guards". UV639 cures crystal clear so it is ideal for applications where aesthetic appearance is important, including shop fittings, screens in supermarkets, offices, banks and retail, point of sale items, furniture and building & construction applications. Key features and benefits of Permabond UV639: Rapid cure in seconds under UV light Crystal clear, invisible finish - non yellowing Excellent thermal & moisture resistance High strength High elongation No need to drill for fixtures and fittings means no risk of stress cracking Fixtures & screws can be eliminated in some applications meaning easier cleaning and disinfection UV639 is various pack sizes: 10 x 50ml bottles 10 x 250ml bottles bulk packaging on request. Click for TDS UV639 Product Leaflet Click for technical help Perspex® is a registered trademark of Perspex International Limited. PLEXIGLAS® is a registered trademark of Röhm GmbH, Darmstadt, Germany.

Anaerobic threaded pipe sealants are generally not suitable for use on pure oxygen pipework connections, but Permabond’s MH052 thread sealant is an exception. It has BAM approval for use with pure oxygen up to 10 bar / 60°C and does not exhibit the instability of a normal anaerobic thread sealant. It is ideal for use on threaded pipework connections in applications such as infant resuscitation units, ventilators, aerospace breathing apparatus, oxygen pipelines and regulators. Advantages of using Permabond MH052 thread sealant over PTFE tape? Easier to apply Lubricates thread, preventing cross threading Lubrication means parts can be assembled facing the right direction Will not perish or shred eliminating risk of small particles blocking valves and equipment Can be dismantled Permabond MH052 has been formulated for use on threaded metal pipes (such as stainless steel and brass) and is a single component, room temperature curing product. In addition to BAM oxygen approval, MH052 is also approved for contact with gas (DVGW) and drinking water (WRAS). Click to watch video Click for technical support Click to download TDS MH052_Flyer_UK_2020 MH052 BAM 2016 Purchase sample